01
Compressors & drive parts
- A/C compressors
- Electric A/C compressors where applicable
- Compressor clutches where serviceable
- Compressor pulleys
- Clutch coils
- Compressor control valves where applicable
- Compressor brackets
- Mounting bolts and spacers
Corolla air-conditioning directory
Toyota Corolla Air Conditioning Parts
Source Corolla HVAC and refrigerant-circuit components by powertrain, refrigerant specification, compressor design, port layout, connector, cabin configuration and reference evidence.
Refrigerant and system typeCompressor design and connectorPort, pipe and mounting layoutPowertrain, market and reference
System-level directoryThe image presents multiple component families in this system. Confirm every requested part by vehicle and part evidence.
Part-specific air conditioning guides
Choose the exact Corolla air conditioning landing page
Each guide covers its own fitment fields, scoped OE evidence where available, commercial order details and part-specific packing risk.
Air Conditioning
A/C Compressors
Separate belt-driven and electric compressor architectures, then record refrigerant, ports, connector, pulley and control-valve scope.
Fitment evidence required · Open guideAir Conditioning
A/C Condensers
Match core dimensions, pipe positions, mounting brackets and whether the receiver-drier is integrated into the condenser assembly.
88450-02330 · Open guideAir Conditioning
Evaporator Cores
Identify the HVAC case and refrigerant branch, then compare the core dimensions, tube geometry, sensor pocket and sealing foam.
88501-02222 · Open guideAir Conditioning
Blower Motors
Match the HVAC case, wheel diameter and depth, rotation, connector and whether the resistor or control module is included.
87103-02210 · Open guideAir Conditioning
Expansion Valves
Match refrigerant and evaporator connection first, then record valve-block port spacing, bolt pattern, control type and seal requirements.
Fitment evidence required · Open guideAir Conditioning
Heater Cores
Match the HVAC case, core dimensions and pipe route before comparing a compact heater core.
Fitment evidence required · Open guideAir Conditioning directory
48 part types in this directory
This working directory organizes the main Corolla air conditioning components buyers place on repair, maintenance and wholesale lists. A listed name describes sourcing scope, not confirmed availability or fitment.
02
Condensers & driers
- A/C condensers
- Integrated receiver-drier elements where serviceable
- Separate receiver driers where applicable
- Condenser mounting brackets
- Condenser seals and O-rings
- Drier caps and plugs
- Condenser guards where applicable
- Mounting hardware
03
Evaporators & HVAC cases
- Evaporator cores
- Evaporator housings
- HVAC case components
- Heater cores
- Drain hoses
- Case seals and foam
- Cabin intake doors
- HVAC case mounting hardware
04
Blowers & air-door controls
- Blower motors
- Blower wheels
- Blower resistors
- Blower control modules
- Mode-door actuators
- Blend-door actuators
- Recirculation actuators
- Actuator links and levers
05
Valves, sensors & switches
- Expansion valves
- Orifice components where applicable
- Refrigerant pressure sensors
- Pressure switches
- Evaporator temperature sensors
- Cabin temperature sensors
- Ambient temperature sensors
- A/C relays and related connectors
06
Hoses, pipes & sealing parts
- Compressor suction hoses
- Compressor discharge hoses
- Condenser pipes
- Evaporator pipes
- Refrigerant service ports
- Pipe brackets and clips
- A/C O-ring sets
- Service caps and sealing plugs
Selection matrix
What must be confirmed before quotation
| Decision point | Buyer evidence | Risk controlled |
|---|---|---|
| System specification | Refrigerant, powertrain and conventional/electric compressor | Controls component and oil compatibility |
| Compressor interface | Pulley, grooves, connector, ports and mounting ears | Controls compressor selection |
| Heat exchanger | Core dimensions, port positions, drier and mounting | Separates condenser and evaporator designs |
| HVAC configuration | LHD/RHD, manual/automatic control and cabin layout | Controls case, actuator and control components |
| Vehicle version | Engine or hybrid system, chassis, production date and market | Separates regional A/C packages |
System-specific risk
Similar A/C parts can use incompatible refrigerant and connections
Compressor type, oil, refrigerant, ports, pulley, connector and condenser layout can change by powertrain and market. Hybrid electric compressors require separate confirmation and safe service procedures.
Buyer FAQ
Corolla air conditioning questions
Can an A/C compressor be matched by engine alone?
No. Confirm refrigerant, compressor label, pulley or electric type, ports, connector, mounting and vehicle application.
Is the receiver drier included with a condenser?
Not always. State whether it is integrated, separately serviceable or required as an additional line.
Can hoses be identified from photos?
Photos help, but port type, pipe bends, total routing, mounting brackets, sensor ports and reference evidence are also needed.
How are hybrid Corolla compressors handled?
Identify the full hybrid powertrain and compressor label. Treat high-voltage electric compressors and their oil requirements separately.
Corolla parts RFQ
Send the part evidence.
Include the generation or year, engine or hybrid version, OE/reference numbers, quantities, destination and packing request. Attach a spreadsheet or old-part photos when useful.
Email
sales@popxa.com
sales@popxa.com
WhatsApp / WeChat
+86 188 3743 1505
+86 188 3743 1505
- Application and reference evidence reviewed before quotation
- Product grade, included scope and packing stated in writing
- Freight basis discussed from quantity and destination—not assumed online