01
Front body parts
- Front bumper covers
- Upper and lower grilles
- Bumper inserts
- Bumper reinforcement where applicable
- Bumper absorbers
- Fog-lamp bezels
- Tow-hook covers
- Front bumper brackets and retainers
Corolla body and exterior directory
Toyota Corolla Body & Exterior Parts
Source Corolla collision and exterior replacement parts by generation, body style, facelift, trim, side, equipment openings, photos and export-packing requirements.
Generation and body stylePre-facelift or faceliftSide, trim and openingsPacking volume and protection
System-level directoryThe image presents multiple component families in this system. Confirm every requested part by vehicle and part evidence.
Part-specific body & exterior guides
Choose the exact Corolla body & exterior landing page
Each guide covers its own fitment fields, scoped OE evidence where available, commercial order details and part-specific packing risk.
Body & Exterior
Front Bumpers
Corolla front bumper covers and related exterior body parts for collision repair and wholesale orders.
52119-03904 · Open guideBody & Exterior
Side Mirror Assemblies
List every mirror function and side explicitly; a matching shell does not establish the installed electronics.
Fitment evidence required · Open guideBody & Exterior
Exterior Door Handles
Identify door and side, then separate a cosmetic shell from a complete passive-entry handle assembly.
Fitment evidence required · Open guideBody & Exterior
Front Fenders
Match the front fender by body, facelift and side, retaining every opening and flange photograph.
Fitment evidence required · Open guideBody & Exterior
Hood Panels
Keep hood skin, inner reinforcement, hinges and latch scope explicit for collision-parts quotation.
Fitment evidence required · Open guideBody & Exterior
Radiator Grilles
Separate upper and lower grille sections and record every trim, sensor and camera opening before quotation.
Fitment evidence required · Open guideBody & Exterior directory
48 part types in this directory
This working directory organizes the main Corolla body & exterior components buyers place on repair, maintenance and wholesale lists. A listed name describes sourcing scope, not confirmed availability or fitment.
02
Rear body parts
- Rear bumper covers
- Rear bumper brackets
- Rear bumper reflectors
- Trunk lids where applicable
- Tailgate parts where applicable
- Rear spoilers
- License-plate trim
- Rear body mounting hardware
03
Doors, handles & moldings
- Front door shells where applicable
- Rear door shells where applicable
- Exterior door handles
- Handle covers
- Door moldings
- Belt moldings
- Weatherstrips
- Door hinges and check straps
04
Mirrors & exterior fittings
- Left mirror assemblies
- Right mirror assemblies
- Mirror covers
- Mirror glass
- Mirror indicators
- Mirror mounting bases
- Cowl panels
- Washer nozzles
05
Panels, liners & under-covers
- Front fenders
- Hoods / bonnets
- Fender liners
- Splash shields
- Engine under-covers
- Stone guards
- Wheel-arch trim where applicable
- Panel brackets and fasteners
06
Exterior trim & mounting
- Rocker moldings
- Pillar trim
- Roof moldings
- Emblem inquiries where lawful
- Body clips and retainers
- Bumper side supports
- Grille clips
- Protective pads and seals
Selection matrix
What must be confirmed before quotation
| Decision point | Buyer evidence | Risk controlled |
|---|---|---|
| Body identity | Generation, sedan/hatch/wagon body, production date and market | Separates different panels and proportions |
| Facelift/trim | Vehicle front/rear photo, grade and exterior package | Controls styling and mounting revisions |
| Equipment openings | Fog lamp, sensor, washer, radar, grille and tow-hook provisions | Prevents an incompatible bumper or grille |
| Side/features | Left/right and mirror/handle electrical functions where relevant | Controls exterior electrical configuration |
| Packing plan | Piece quantity, nesting limits, protection and destination | Controls bulky or fragile export handling |
System-specific risk
Body panels can look correct while the mounting and openings differ
Facelift, trim and safety equipment can change tabs, brackets, sensor holes and grille interfaces. Send full vehicle photos and the removed part before approving a body component. Packing must be evaluated separately from product fitment.
Buyer FAQ
Corolla body & exterior questions
Can a front bumper be selected from model year alone?
No. Confirm the generation, facelift, trim, fog-lamp and sensor openings, grille interface, photos and reference where available.
Are grilles and brackets included with bumper covers?
Not automatically. List every grille, insert, bracket, absorber, trim piece and lamp cover separately.
Why is packing reviewed before quoting body parts?
Bumpers and panels are volume-sensitive and vulnerable to deformation or scratches. Quantity, nesting and destination affect the packing proposal.
Can mirrors be included in this category?
Yes. State side, connector, folding, heating, indicator, camera or blind-spot features, finish and vehicle version.
Corolla parts RFQ
Send the part evidence.
Include the generation or year, engine or hybrid version, OE/reference numbers, quantities, destination and packing request. Attach a spreadsheet or old-part photos when useful.
Email
sales@popxa.com
sales@popxa.com
WhatsApp / WeChat
+86 188 3743 1505
+86 188 3743 1505
- Application and reference evidence reviewed before quotation
- Product grade, included scope and packing stated in writing
- Freight basis discussed from quantity and destination—not assumed online